Welding Equipment - Extreame Savings! Save up to 46%


Extreame Savings! Up to 46% off on Welding Equipment at Historic Charles Street. Top brands include TGB, Blue Demon, Hobart, WeldingCity, US Forge, Polyvance, STKUSA, Co-link, Saf-T-Cart, & Victory. Hurry! Limited time offers. Offers valid only while supplies last.



ER316L - TIG Stainless Steel Welding Rod - 36" x 1/16" (5 LB)
By TGB
In Stock
$48.00

mpn: 316LR5x116, ean: 0685867901204,

4.2 out of 5 stars with 79 reviews
ER316L - TIG (GTAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: The main component of ER316L is 18Cr-12Ni-2Mo; it is Stainless steel TIG welding wire. The metal of weld bead has excellent corrosion resistance, heat resistance and excellent crack resistance it has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt corrosion because it contains Molybdenum. USES: It is widely used in petrochemical, chemical fertilizer equipment such as 06Cr17Ni12Mo2 (SUS


Blue Demon ER309L X .035 X 30LB Spool stainless steel welding wire
By Blue Demon
In Stock
$161.40

mpn: ER309L-035-30, ean: 0652426221479,

4.7 out of 5 stars with 53 reviews
ER309/309L is very similar to type 309 except for the carbon content being lower than .03%. Welding positions full, vertical, overhead, horizontal.The extra low carbon provides good resistance to carbide precipitation and corrosion. ER309L works well for dissimilar joints that undergo heat treatment. AWS A5.9, Welding current DCEP.


Hobart H222106-R22 10-Pound E71T-11 Carbon-Steel Flux-Cored Welding Wire, 0.030-Inch
By Hobart
In Stock
$84.99

mpn: H222106-R22, ean: 0715959249973,

4.0 out of 5 stars with 111 reviews
Flux core wire enables user to weld without using a shielding gas on straight polarity MIG welders. Features great single or multi-pass welds on mild steel. U.S.A. Product Type: Welding wire, Compatible With: MIG, Weight (lbs.): 10, Welding Processes: Single or multi-pass welds on mild steel, Wire Material: Flux core, Wire Size (in.): .030Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel.. Typically used for light structural, machinery part fabrication,


E309L-16 - Stainless Steel Welding Electrode - 14" x 1/8" (2 LB)
By TGB
In Stock
$15.60

mpn: 309L16E14x18x2, ean: 0685867901433,

4.8 out of 5 stars with 10 reviews
E309L-16 STAINLESS STEEL ELECTRODE AWS A5.4 Welding Positions: All, except vertical down AC & DC+ (reverse polarity) INTRODUCTION: Rutile-basic coated, high-alloy stick electrode. Designed for joining stainless steel to mild or low alloy steel. Can be welded in any position except vertical down. Joint welding on heat-resistant CrNi steels. Self-removing slag, very low spatter tendency. For dissimilar joints and buffer layers. Excellent ignition and re-ignition characteristics. Maximum operating


WeldingCity 10-Lb ER316L Stainless Steel TIG Welding Rods 316L 0.045"x36"
By WeldingCity
In Stock
$47.99

mpn: 1, ean: 0799491553286,

4.0 out of 5 stars with 95 reviews
Premium quality ER316L stainless steel TIG welding rods, 0.045''x36''Premium quality ER316L stainless steel TIG welding rods, 0.045''x36''. AWS Classification: ER316L. Wire diameter 0.045''(1.2mm). You get Ten (10) lbs ER316L (0.045''x36'') TIG filler rods at this price. Please provide a US Postal Service (USPS) deliverable address..


WeldingCity 1# ER308L Stainless Steel TIG Welding Rods 1-Lb 3/32"x36"
By WeldingCity
In Stock
$12.00

mpn: AMZ_ER308L_332_1LB, ean: 0604697474368,

4.6 out of 5 stars with 119 reviews
Premium quality ER308L stainless steel TIG welding rods, 3/32''x36''Premium quality ER308L stainless steel TIG welding rods, 3/32''x36''. AWS Classification: ER308L. Wire diameter 3/32''(2.4mm). You get Ten (1) lbs ER308L (3/32''x36'') TIG filler rods at this price. Please provide a US Postal Service (USPS) deliverable address..


Blue Demon ER70S6 X .045 X 1LB Tube Carbon Steel TIG rod
By Blue Demon
In Stock
$13.12

mpn: ER70S6-045-01T, ean: 0652426701520,

4.7 out of 5 stars with 139 reviews
ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon that other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel.General shop applications with poor fit-up. Steel castings or forging salvage. Home projects.


WeldingCity 10-Lb ER316L Stainless Steel TIG Welding Rods 316L 1/8"x36"
By WeldingCity
In Stock
$42.99

ean: 0799491551596,

4.6 out of 5 stars with 119 reviews
Premium quality ER316L stainless steel TIG welding rods, 1/8''x36''Premium quality ER316L stainless steel TIG welding rods, 1/8''x36''. AWS Classification: ER316L. Wire diameter 1/8''(3.2mm). You get Ten (10) lbs ER316L (1/8''x36'') TIG filler rods at this price. Please provide a US Postal Service (USPS) deliverable address..


US Forge Welding Solid Mild Steel MIG Wire .035 2-Pound Spool #00672
By US Forge
In Stock
$14.67
$7.99
You Save: 46%

mpn: 672, ean: 0093425006726,

4.2 out of 5 stars with 17 reviews
SOLID MILD STEEL MIG WIRE - Requires CO2 shielding gas. Excellent wire designed for single and multiple pass welding. Can also be used for sheet metal applications when smooth welds are needed.Excellent wire designed for single and multiple pass welding. Can be used for sheet metal applications when smooth welds are needed. A shielding gas is required when welding with this wire. Fabrication and repair of lightweight structural steel. Excellent choice for welding low carbon mild steel, I deal


Polyvance Reinforcing Mesh
By Polyvance
In Stock
$15.99
$11.95
You Save: 25%

mpn: FBA_2045W,

4.1 out of 5 stars with 86 reviews
Reinforcing Wire Mesh is designed to be used with the Uni-Weld Ribbon and FiberFlex rod and can be used on any type of thermoplastic repair. We recommend that mesh be used when a tear goes to the edge of the plastic. It's made from stainless steel, so it's five times stronger than regular aluminum wire screen. You can also use the mesh to fabricate tabs, fill holes, and provide reinforcement in any thermoplastic (meltable plastic). Each sheet of mesh is 5 inches (12.7 cm) by 10 inches (25 cm).


Professional Electric 240 Volt Spot Welder Welding Systems
By STKUSA
In Stock
$139.95

mpn: 3812518, ean: 0715050825083,

4.6 out of 5 stars with 85 reviews
Not for welding aluminum, copper or copper alloysElectrical Rating: 240V/16A. Rated Output: 2.5kVA@50% Duty Cycle. Weldable Materials: Uncoated mild, galvanized, or stainless sheet steel. Mild steel: up to a combined thickness of 1/8'' sheet steel. Galvanized steel: two pieces of 20 gauge (0.039'') sheet steel.


V-Wac Biting Edge Stainless Steel Welding Gauge Gage for Welder Inspection
By Co-link
In Stock
$15.59

mpn: V-WAC, ean: 0701622234544,

4.4 out of 5 stars with 16 reviews
Features 1. Widely used to check undercut depth, porosity comparison, amount of porosity per linear inch and crown height 2. Accurate figures and increments are etched into surface 3. Laser engraved line, easy to read and will not rub off 4. Pointer is easy to set and a locking screw holds it in position for later reference 5. All measurements are made with a single gauge 6. Miniature and light weight, easy to carry Specification: Material: Stainless steel Colour: Silver


Blue Demon 316FC-O X .035 X 1LB Spool stainless steel flux core gasless welding wire
By Blue Demon
In Stock
$42.22
$41.18
You Save: 2%

mpn: 316LFCO-035-01, ean: 0652426401352,

4.5 out of 5 stars with 129 reviews
316FC-O is a self shielding flux core version of solid ER316L stainless steel welding wire. It has a low carbon content.It is used for welding type 316 series stainless steel. AWS Classification E316LFC-O. AWS A5.22 Welding current DCEP.


ER308L - TIG Stainless Steel Welding Rod - 36" x 1/16" (5 LB)
By TGB
In Stock
$42.00

mpn: 308LR5x116, ean: 0685867901112,

4.4 out of 5 stars with 57 reviews
ER308L - TIG (GTAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: The main component of ER308L is ultra-low carbon 18Cr-8Ni; it is ultra-low C Stainless steel TIG welding rod. The intergranular corrosion resistance of the weld metal is more excellent. Welding smoothly, weld bead smoothly, excellent corrosion-resistance, crack-resistance for acetic acid, sulfuric acid, phosphoric acid and salt corrosion because it contains Molybdenum. USES: Sheet metal on the corresponding


WeldingCity ER70S-6 ER70S6 Mild Steel MIG Welding Wire 11-Lb Spool 0.023" (0.6mm)
By WeldingCity
In Stock
$25.99

mpn: ER70S1123, ean: 0608729697343,

4.4 out of 5 stars with 77 reviews
Premium quality MIG/TIG welding wirePremium quality MIG/TIG welding wire. 11-lb, 8'' spool ER70S-6 copper coated MIG welding wire wrapped in moisture-resistant plastic film.. AWS Classification: ER70S-6. Wire diameter 0.023''(0.6mm). You get One (1) roll of ER70S-6 11-Lb spool at this price.


Blue Demon 308LSI X 1/16" X 36" X 10LB Box stainless steel TIG welding rod
By Blue Demon
In Stock
$55.70

mpn: ER308LSI-063-10T, ean: 0652426792092,

4.3 out of 5 stars with 145 reviews
ER308LSI has a slightly higher silicon content that ER308/308L. The higher silicon improves arc stability, bead appearance and wetting action.ER308LSI produces exceptionally smooth welds for applications that require a good cosmetic appearance. This product is used primarily with welding grades 304 and 308. AWS A5.9, Welding Current DCEN.


Cylinder Bracket, Steel, 3 In. H
By Saf-T-Cart
In Stock
$42.30

mpn: WB101,

4.9 out of 5 stars with 133 reviews
' Cylinder Bracket, Diameter 3 to 10 In., Material Steel, Cylinder Capacity 1, Height 3 In., Width 14 In., Depth 6-1/2 In., Includes Strap To Secure Cylinders 'Price For: Each Includes: Strap to Secure Cylinders Diameter: 3 to 10'' Cylinder Capacity: 1 Height: 3'' Material: Steel Item: Cylinder Bracket Depth: 6-1/2'' Width: 14'' Country of Origin (subject to change): United States.


ER70S-6 - TIG Mild & Low Alloy Steel Rod - 39" x 1/16" (5 Lb)
By TGB
In Stock
$30.40

ean: 0600136280972,

4.9 out of 5 stars with 53 reviews
ER70S-6 is a carbon steel argon-arc welding rod. It has excellent plasticity, roughness and crack-resistance; especially in low temperature impact toughness is higher.. Used for all-position manual tungsten argon TIG.. It can be used for welding carbon steel and some low-alloy steel. Copper coated manganese-silicon wire for welding of mild steel and 490 N/mm2 grade steel. 5 Lb Package.


WeldingCity 5-Lb ER316L Stainless Steel TIG Welding Rods 316L 1/16"x36"
By WeldingCity
In Stock
$24.99

mpn: ER316L-T5-116, ean: 0799491550575,

4.5 out of 5 stars with 28 reviews
Premium quality ER316L stainless steel TIG welding rods, 1/16''x36''Premium quality ER316L stainless steel TIG welding rods, 1/16''x36''. AWS Classification: ER316L. Wire diameter 1/16''(1.6mm). You get Five (5) lbs ER316L (1/16''x36'') TIG filler rods at this price. Please provide a US Postal Service (USPS) deliverable address..


RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36" x 3/32" (1 LB)
By Victory
In Stock
$13.40

mpn: RG45R10x332, ean: 0689761157255,

4.9 out of 5 stars with 112 reviews
RG45 is a copper coated low carbon steel rod which is widely used for oxyfuel welding on mild steel. It has good ductility and good machinability. Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 can be used on steel plate, sheet and pipe where high strength is not required. While this alloy was originally developed and are commonly used for oxyfuel welding, they can be used for TIG welding. Flux is not needed but, ''puddling'' of the molten metal will



Viewing Page 1 of 3

View more products in Welding & Soldering.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.