Browse Our Catalog

Punches - Page 3 - Super Savings! Save up to 39%


Super Savings! Up to 39% off on Punches at Historic Charles Street, Page 3. Top brands include Allpax, Aiskaer, Young Bros., Starrett, HHIP, Mayhew Tools, Fowler, Pryor, L.E. Wilson, Greenlee, Twod, Grace USA, SE, Pittsburgh, C.S. Osborne, Maxpower, & CGOLDENWALL. Hurry! Limited time offers. Offers valid only while supplies last.



Allpax AX1334 Replacement Cutting Head for Hollow Punch, 2" Size, Steel
By Allpax
In Stock
$33.92
$26.86
You Save: 21%

mpn: AX1334, ean: 0690773029256,

4.5 out of 5 stars with 133 reviews
The Allpax AX1334 Replacement Cutting Head for Hollow Punch, 2''. Features a hardened steel hollow cutting head that stays sharp. Unique design punches single diameter holes (bolt holes) as well as dual diameter rings (washers) in one operation. Dimensions: 2'' Diameter by 1.8'' High, Weighs 0.3 lb.Individual hollow cutting head. Made of hardened steel. Made for Allpax standard hollow punch tool kits (sold separately). Unique design.


Aiskaer 10-piece Stainless Steel Hollow Leather Punch tools(1mm to10mm Punch tools set)
By Aiskaer
In Stock
$20.99

mpn: 1, ean: 6895993262740,

4.3 out of 5 stars with 54 reviews
About the product:The Aiskaer 10-Piece Hollow Punch Set can quickly cut holes in gaskets, leather, rubber, cardboard and other soft material .Made from heat treated carbon steel, each punch has a precisely ground edge for clean, easy cuts. Produc Specification :Material: Stainless steelHole punch size: 1mm,2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mmPackage weight:1.24lbAverage length: 4.72 inches Package includes :10-Piece Leathercraft Punch ToolsHeat treated carbon steel construction.


Young Bros 03363 36 Piece Heavy Duty Stamp Combination Letter and Figure Set, Steel, 1/8" Character Size
By Young Bros.
In Stock
$134.50

mpn: 03363, ean: 0054468033636,

4.0 out of 5 stars with 60 reviews
Young Bros. 1/8'' Character Size Heavy Duty Combination Letter and Number Steel Stamp Set.Heavy Duty Steel Stamps.


Starrett S248PC Extended Length Drive Pin Punch, 1/8"-3/8" Pin Diameters, 8" Overall Length, 3-1/2" Pin Length, In Red Vinyl Pouch (Pack of 5)
By Starrett
In Stock
$45.00
$32.25
You Save: 28%

mpn: S248PC, ean: 0049659511864,

4.4 out of 5 stars with 28 reviews
The Starrett 248PC set with pouch includes five extended length drive pin punches with an 8'' overall length, 3-1/2'' long pin, and 1/8'', 3/16'', 1/4'', 5/16'', and 3/8'' pin diameter sizes to push pins and rivets into or out of a workpiece. The extra-long drive pin section provides greater reach in recessed areas, which makes it suitable for machine shop and motor service work. Each punch is made from hardened and tempered steel, which provides wear resistance and strength. The round shanks


HHIP 8600-0041 28 Piece Transfer Punch Set, 3/32" - 1/2"
By HHIP
In Stock
$16.95

mpn: 8600-0041, ean: 0769053067063,

4.7 out of 5 stars with 147 reviews
28 Piece Transfer Punch Set ~ 3/32-1/2'' by 64ths and 11/32'' ~ Undersize .0025''. ~ Heat treated tempered tool steel for longer life. ~ Black oxide finish. ~ Used for transferring of threaded, drilled and tapped holes.3/32-1/2'' by 64ths and 11/32''. Undersize .0025''. Heat treated tempered tool steel for longer life. Black oxide finish. Used for transferring of threaded, drilled and tapped holes ..


Mayhew 62081 6-Piece Hardened Steel Long Pin Punch Set
By Mayhew Tools
In Stock
$79.99
$73.51
You Save: 8%

mpn: 62081, ean: 0045256620817,

4.0 out of 5 stars with 132 reviews
Pin punches are used for driving out already loosened pins and keys. Available in many lengths and sizes to fit any application. Comes with an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of the professionals employed, businesses trust Mayhew to get the job done. Since 1856, our punches, chisels, and pry bars have been the go-to tools for OEMs and professional mechanics throughout the


Fowler Full Warranty 52-482-028-0 Steel Transfer Punch Set supplied with Index stand, 28 Piece
By Fowler
In Stock
$32.74
$20.09
You Save: 39%

mpn: 52-482-028-0, ean: 0646795163058,

4.7 out of 5 stars with 39 reviews
Fowler full warranty 52-482-028 28 piece steel transfer punch set is supplied with index stand. Punches are made of hardened and tempered tool steel and black oxide finish. Complete with a steel indexing tray with sizes clearly marked on the tray. Ranges from 3/32'' to 1/2'' with the increments of 1/64''. All sizes are marked and diameters are slightly undersized for easy handling. Great for tool makers, machinists and tool cribs. This product has 1 year warranty offered by Fowler Precision.


PRYOR TIFH030 Interchangeable Steel Type Fount Set, Complete with Hand Holder, 1/8" Character Size, 3.0 mm
By Pryor
In Stock
$492.85
$326.96
You Save: 34%

mpn: TIFH030, ean: 5022044050587,

4.8 out of 5 stars with 50 reviews
Interchangeable steel Type & holders, provides the perfect answer for all batch and general purpose marking. Simply build a Series of characters into a holder and with just one strike produce a multi-character mark quickly with uniform legibility. precision ground blanks and clear character style give quality marks of consistent depth. Each blank is hardened to precise limits and nickel plated to give optimum life and maximum safety in use. blank dimension: 1/8 inches (3.20 millimeters)


L.E. Wilson PMG-380 380 Auto Pistol Max Gage, Polished Steel
By L.E. Wilson
In Stock
$24.99

mpn: PMG-380, ean: 0815145020024,

4.1 out of 5 stars with 62 reviews
The Wilson Pistol Max (Cartridge) Gage is designed to check loaded pistol cartridges and is set to maximum SAAMI spec dimensions. This gage will measure Max Case Length, Max Cartridge dimensions and Max Loaded Round Length. But, more importantly it will help you to determine what is going on with your loaded ammunition. It can help to solve many issues associated with loading pistol ammunition. Such as, bowing of cases during sizing, oblong rounds, bulge on case or crimp just to name a few. The


Greenlee 745H-4 Knockout Punch Unit for 4 Inch Conduit
By Greenlee
In Stock
$445.00

mpn: 745H-4, ean: 0783310006213,

4.5 out of 5 stars with 126 reviews
Greenlee 745H-4 punch unit for stainless steel. With new larger punches for stainless steel that punch 4-Inch holes in up to 10 gauge steel. The proprietary cutting edge extends punch life and punches more holes.Makes clean accurate holes. Rated for punching in up to 10 gauge stainless steel. Excellent abrasion resistance for punching fiberglass and plastic. Kit includes punches, dies, draw stud and sleeve.


Twod Roll Pin Punch Set with Storage Pouch, 9 Piece Steel Removal Tool Kit for Jewelry, Watches,Rifle Pins
By Twod
In Stock
$20.99
$12.99
You Save: 38%

mpn: T690031001122-1,

4.9 out of 5 stars with 46 reviews
Description:Twod Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.As a bonus, this set comes with an awesome pin holder case.These have an elevated pilot point tip which makes it line up on the roll pin for a nice easy removal of the roll pin.This set is ideal for repairing or servicing


L.E. Wilson INR-220 Inside Neck Reamer for Trimmer 22 Caliber with Finish Diameter 0.2265"-0.227", Hardened Ground Steel
By L.E. Wilson
In Stock
$33.99

mpn: INR-220, ean: 0815145022998,

4.3 out of 5 stars with 27 reviews
Thick necks can cause high chamber pressures and erratic shooting. Neck reamers remove excess neck material to insure adequate clearance exists between the case neck and the chamber. Also, these reamers can be used when forming wildcats from a parent case. Reamers are used in the trimmers in place of the trimmer cutter. Standard reamers are sized for use on FIRED unsized cases.L.E. Wilson Inc. a family owned and operated business since 1927. Finish Reamer Size .2265 - .227. To be used on FIRED


Grace USA - SHORT Roll Steel Spring Punch Set - SRS7 - Gunsmithing - Steel Punches - 7 piece -Gunsmith Tools & Accessories
By Grace USA
In Stock
$30.65
$25.51
You Save: 17%

mpn: SRS7, ean: 0731940537775,

4.3 out of 5 stars with 52 reviews
The Grace USA SRS7, a 7 piece Short Roll Pin Punch Set, is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch. Finely crafted with care and precision in the USA.The SRS7 is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch. The SHORT shaft provides more control; putting your hand closer to the pin, so you don't bend a finishing punch. Made from quality 5/16 Hex stock. Made in the


SE JT34613W 12-Piece Steel Dapping Punch with Wooden Storage Block
By SE
In Stock
$21.26
$20.50
You Save: 4%

mpn: JT34613W, ean: 0706569059694,

4.5 out of 5 stars with 14 reviews
Use this dapping punch set to form metal into various shapes and sizes—great for hobbyists and professional jewelers. For your convenience, this set comes organized in a durable plastic storage box with sections fitted specially to the size of each piece, in addition to a lid that has been labeled to identify each size. Features of this product include: -(12) Magnetic heads (12.3mm – 24.7mm)-(3) Handles—corresponding with the following head sizes:-15.5mm handle—12.3mm, 12.7mm, 13.5mm,


36 Piece 1/8" Letter Number Stamping Set
By Pittsburgh
In Stock
$19.99
$15.99
You Save: 20%

mpn: 90124, ean: 0792363901246,

4.1 out of 5 stars with 24 reviews
Hardened high-carbon steel stamps. 26 letters A-Z and ''&'' sign Numerals 0-8 (turn ''6'' upside down for ''9'') 1/8'' high characters Organized in a protective case36 Piece 1/8'' Letter & Number Stamping Set. 26 letters A-Z and ''&'' sign. Numerals 0-8 (turn ''6'' upside down for ''9''). 1/8'' high characters. These stamps come covered in oil to prevent rusting..


Starrett S565WBS Steel & Brass Drive Pin Punch Set
By Starrett
In Stock
$60.00

mpn: S565WBS, ean: 0049659737325,

4.4 out of 5 stars with 107 reviews
Starrett S565WBS steel & Brass drive pin punch set. The Starrett 565 drive pin punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. Round plastic box included. Length (in): 4'' (mm): 100mm, material: steel & Brass, set quantity: 8, sizes included: 1/16'', 3/32'', 1/8'', 5/32''Knurled grip for secure holding. Round red plastic box. Hardened and tempered (steel). Punch diameter clearly marked on the


L.E. Wilson CTP-TNC Case Trimmer Standard Cutter Only, TiN Coated Hardened Ground Steel
By L.E. Wilson
In Stock
$39.99

mpn: CTP-TNC, ean: 0815145022783,

4.3 out of 5 stars with 61 reviews
L.E. Wilson Inc. a family owned and operated business since 1927. Keeping the business in the family has insured the highest quality and craftsmanship possible. Wilson's uses the highest quality materials and our tools are know world wide for their reputation of precision and accuracy.Cutter replacement upgrade. Tin coated high quality steel. Made in the U.S.A. This is a L.E. Wilson replacement part. Part Number CTP-TNC.


C.S.Osborne 5/8" Arch Punch with Fully Tempered Cutting Edge
By C.S. Osborne
In Stock
$38.49
$37.28
You Save: 3%

mpn: 1024,

4.0 out of 5 stars with 66 reviews
Osborne arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16'' to 2-1/4'' diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully tempered all the way through and properly finished to provide long use


MAXPOWER 13-Piece Steel Punch and Chisel Set - Pro grade Octagonal Cape Chisel, Pin Punch, Taper Punch, Center Punch in a Rolling Pouch- Polished Chrome Finish
By Maxpower
In Stock
$34.99

mpn: MAX-19, ean: 6909009104372,

4.4 out of 5 stars with 105 reviews
Tools Included in Steel Punch Set The following measurements and tools are listed left to right. 18x14x175, 15x12x150, 12x9.5x130mm octagonal chisel 5x9.5x130mm Cape Chisel 2x9.5x150, 3x9.5x150, 4x9.5x150, 5x9.5x150, 6x12x150, 8x12x150m Pin Punch 3x9.5x120mm Taper Punch 4x9.5x120, 5x12x150mm Center Punch Carrying Case Roll up carrying case is included with the tool set so you can easily carry your tools from job site to job site. Simply unroll and have all your punch tools ready to get to


MHP-20 Electric handy hydraulic hole puncher for punching 6mm thickness (6.5mm-20.5mm) steel angle steel iron aluminum plate Certificate CE ROHS
By CGOLDENWALL
In Stock
$899.00

mpn: MHP-20, ean: 6061268321478,

4.0 out of 5 stars with 123 reviews
Main advantages:Portable, small and easy to operate also saving power and punch speedy. Use:Used in punching on steel plate, angle steel plate, iron plate, aluminum plate, U-steel etc. Electric punching machine instructions: 1, mainly used for copper platoon, LvPai, iron plate, Angle iron and other metal materials punching tool. 2, easy to carry and suitable for field on-site or fixed in the factory for mass production. 3, can produce various shapes of punching die. 4, punching positioning



Viewing Page 3 of 5

View more products in Hand Tools.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.