Nail Pullers - Page 2 - Super Savings! Save up to 35%


Super Savings! Up to 35% off on Nail Pullers at Historic Charles Street, Page 2. Top brands include Dasco Pro, Upholstery Staple Remover, Bucket Boss, Shark Corp, Task Tools, Vaughan, OTRMAX, Estwing, KNIPEX Tools, Workline, UJ Ramelson Co, Vaughan & Bushnell, OCM, & C. S. Osborne & Co.. Hurry! Limited time offers. Offers valid only while supplies last.



Dasco Claw Bar 12 "
By Dasco Pro
In Stock
$111.76
$110.45
You Save: 1%

mpn: 132,

4.7 out of 5 stars with 28 reviews
DASCO PRO nail pullers feature a variety of nail pulling slots. Sharp V slots bite in the nail shank for easy nail removal. Designed and manufactured in the USA.Made of high carbon steel that has been heat treated. Sharp V slots bite in the nail shank for easy nail removal. Designed and manufactured in the USA.


C.S. OSBORNE No. 600 - Staple Puller Plier for Upholstery
By Upholstery Staple Remover
In Stock
$23.89

mpn: 600, ean: 0660845705715,

4.7 out of 5 stars with 106 reviews
C.S. Osborne Staple Puller #600 Forged steel. Vinyl handles to add comfort. 600 - (Green Grips) Nose of the plier is bent at the right angle to go under the staple, grab it and pull it out.CS OSBORNE No. 600 - Staple Puller Plier for Upholstery. Overall length (in): 6 1/2, Maximum jaw opening (in): 7/8, Weight each (oz): 6. Nose of the plier is bent at the right angle to go under the staple, grab it and pull it out.. Forged steel. Vinyl handles to add comfort.. MADE IN USA.


Dead on EX9 10-5/8-Inch Exhumer Nail Puller
By Bucket Boss
In Stock
$21.00
$15.26
You Save: 27%

mpn: EX9, ean: 0787721736868,

4.2 out of 5 stars with 59 reviews
Pull'r Holdings EX9 9'' Dead On Exhumer Nail Puller The E x 9 Death Stick Exhumer is More than a nail puller - Buried the nail in the wrong board? No worries, just dig it up with the Death Stick Exhumer.Pull'r Holdings EX9 9'' Dead On Exhumer Nail Puller Features: S-5 grade steel invest casted Built in saw wrench Built in extractor nail pick Built in bottle opener Limited manufacturer lifetime warranty 9''S-5 Grade Steel Invest Casted. Built-In Saw Wrench. Built-In Extractor Nail Pick. Built-In


Shark Corp 21-2020 7-5/8-Inch Nail Puller
By Shark Corp
In Stock
$13.50
$11.28
You Save: 16%

mpn: 21-2020, ean: 0008023120200,

4.3 out of 5 stars with 80 reviews
All Sharkgrip Nail Pullers And Prybars Are Forged From The Finest Heat-Treated Japanese Alloy Steel; The Nail-Pulling And Prying Ends Are Double-Tempered For Added Strength. The Pulling ''V'' Is Hardened To A Rockwell 50-52 Hardness, Then Hand-Finished For Accuracy. The Resulting Tool Is So Strong It Can Even Bite Into Hardened And Stainless Steel Nails. Sharkgrip Nail Pullers Pull From The Shank Of The Nail, Not The Head. Sharkgrip Japanese ''Cat’S Paw''-Type Nail Pullers Have Been The


Task Tools T47043 Nail Puller
By Task Tools
In Stock
$22.87

mpn: T47043, ean: 0062466470438,

4.3 out of 5 stars with 105 reviews
Pry out nails quickly and easily with this nail puller from Task Tools. The puller is great for recycling lumber, re-installation, and more. Double-ended for wiggling in underneath head, then prying out with force, the puller does it all. Heavy-duty steel construction means optimal durability for years of use. Measures 10-1/2-Inch (length).Nail puller for recycling lumber, re-installation. Double-ended for wiggling in underneath head, then prying out with force. Heavy-duty steel construction


Vaughan 570-30 BC12 Bear Claw Nail Puller, 11-3/4-Inch
By Vaughan
In Stock
$28.19
$22.65
You Save: 20%

mpn: 570-30, ean: 0743153377376,

4.8 out of 5 stars with 20 reviews
Vaughan has been designing and manufacturing hammers for over 135 years. Many of what are now accepted as basic hammer designs - from the distinctive curve of the claw to the set of the handle and the shape of the head were introduced by Vaughan. All are the result of Vaughan's commitment to constant hammer improvement and extensive field testing.Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Black, rust-resistant


Shark Corp. 21-2023 Hardened Steel Alloy Nail Pullers
By Shark Corp
In Stock
$14.50
$10.42
You Save: 28%

mpn: 21-2023, ean: 5448095633577,

4.1 out of 5 stars with 56 reviews
Hand-Sharpened, Double-Tempered Chromium High Carbon Steel Blade Will Bite Into Any Part Of Nail Including Headless Nails. 9'' Long.Hand-sharpened, double-tempered chromium high carbon steel blade will bite into any part of nail including headless nails. This product is easy to use easy to install and highly durable. Item is manufactured in China. Hardened ''V'' takes a positive bite into the nail's shank for easy removal. Curved underside easily slides under an embedded nailhead or onto the


OTRMAX 2 Pcs Clip Removal Pliers Combo Repair Kit for Automobile Door Panel Upholstery Fastener Trim Clip Removal
By OTRMAX
In Stock
$14.79

mpn: crps, ean: 0613617210887,

4.3 out of 5 stars with 142 reviews
Feature: Material: Plastic + Steel Trim Clip Plier Length: 24 cm Trim Remover Length: 21 cm Package included: - 1 x Trim Clip Plier - 1 x Trim RemoverHigh Quality Upholstery Clip Plier & Fastener Remover Repair Tool. Suitable for automobile maintenance, can be used to modify the automobile headlight, HID xenon lamp, angel eyes, double optical lens removal pliers.. Designed to easily remove door upholstery, clips, door panel clips, and all other trim anchors and clips without damage and easy


Estwing Pro Claw Nail Puller - 12.5" Pry Bar with Forged Steel Construction & No-Slip Cushion Grip - PC300G
By Estwing
In Stock
$17.99
$11.67
You Save: 35%

mpn: PC300G, ean: 0743153712214,

4.2 out of 5 stars with 123 reviews
Estwing's popular 12 in. Japanese style Pro Claw Nail Puller, is made with fine tool steel, drop forged and tempered for extra durability. Chrome finish and comfortable blue cushion grip. Both nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shape and rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places. For use in nail removal right angled for removing embedded and


Knipex 50 01 300 Carpenters’ Pincers 11,81" with plastic coated handles
By KNIPEX Tools
In Stock
$63.99
$53.82
You Save: 16%

mpn: 50 01 300, ean: 4003773016915,

4.8 out of 5 stars with 64 reviews
Pliers black atramentized. With plastic coated handles. Specially favoured by craftsmen for their precise workmanship.Pliers black atramentized. With plastic coated handles. Specially favoured by Craftsmen for their precise workmanship.


Shark Corp 21-2220 8-Inch Prybar and Nail Puller
By Shark Corp
In Stock
$16.99
$11.40
You Save: 33%

mpn: 21-2220, ean: 5915903758963,

4.2 out of 5 stars with 56 reviews
This Pry Bar And Nail Puller Is Made With High-Quality Hardened Steel Alloy And The Thinnest Blade Available On The Market. It Will Pry Into Any Tight Spot With Ease, Doing Less Damage To Wall And Molding Surfaces. The Curve Of The Blade Is Designed To Lift Molding Easily With A Turn And Is So Sharp It Removes Any Nail, Even Very Small And No-Head Nails, Lodged In The Wall Or Any Other Material. Made With Chromium High Carbon Steel And The Thinnest Blade Available. Wide Blade Yields Less


Vaughan 570-27 BC10 Bear Claw Nail Puller, 10-1/2-Inch
By Vaughan
In Stock
$16.99

mpn: 570-27, ean: 0743153377369,

4.1 out of 5 stars with 122 reviews
Vaughan has been designing and manufacturing hammers for over 135 years. Many of what are now accepted as basic hammer designs - from the distinctive curve of the claw to the set of the handle and the shape of the head were introduced by Vaughan. All are the result of Vaughan's commitment to constant hammer improvement and extensive field testing.Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant finish.


Estwing HB-15 (2) 15-inch Forged Half-Round Handy Bar Steel Nail Pullers
By Estwing
In Stock
$34.03

mpn: HB-15,

4.3 out of 5 stars with 147 reviews
Made in the USA with a limited lifetime warranty and included with (2) Estwing HB-15 Handy Bars. Each 15-inch Handy Bar is constructed with a forged half round, for added strength and less weight. Wide, thin blade for easy prying. Includes (2) HB-15 Nail Pullers.Completely forged. Forged half round to eliminate weight, add strength, permit easy rocking any direction. Wide, thin tapered blades for marproof prying. Blade width 1-3/4in.


Workline Upholstery Staple Remover with Bonus Tack Puller Tool Saves You Hours
By Workline
In Stock
$27.94

mpn: 1, ean: 0798154091264,

4.4 out of 5 stars with 134 reviews
Perfect for making a novice feel like pro on any project you tackle. Scroll up to the images and bullets see how. Go up top and pick one up now risk free and for further savings check out the special offers product promotions. Get second third as holiday gift do it yourselfer in life.LIMITED TIME OFFER - SAVE 50% UNTIL March 1, 2018 - Best Hassle Free Lifetime Guarantee. Minimal effort is required to pry with ergonomic grip and leverage bar even if shot from an air gun. Safe on furniture trim


Osborne 600 787A 124 120-1/2 Staple Puller Lifter Cutter Remover - Upholstery Tools - DIY - Made in the USA
By UJ Ramelson Co
In Stock
$109.95

mpn: x4pullers,

4.4 out of 5 stars with 106 reviews
CS Osborne - 600 - Forged steel. Vinyl handles to add comfort. Nose of the pliers is bent at the right angle to go under the staple, grab it and pull it out. 787A - Forge steel with extra long, pointed cutter. Polished head with vinyl handles. Depth of head aids in removing staples. This is the famous European ''vienner''.124 - Forged from alloy tempered steel. A consistently made Osborne quality product. Carefully hardened for long lasting use. Hardwood handle with nickel plated ferrule.120


Shark Corp 21-2016 Hardened Steel Alloy Nail Pullers
By Shark Corp
In Stock
$13.00

mpn: 21-2016, ean: 6919289910822,

4.3 out of 5 stars with 61 reviews
The Shark 21-2016 Hardened Steel Alloy Nail Pullers is designed for removing even the most stubborn finish nails Removes even embedded, headless or rusted nails Dropped forged construction; chrome vanadium finish Curved underside easily slides under an embedded nail head or onto the nail's shank Hardened ''V'' takes a positive bite into the nail's shank for easy removal.For 1 inch to 1-3/4 finish nails/staple.


Vaughan & Bushnell NP12DE Double End Nail Puller
By Vaughan & Bushnell
SKU: #2490-3015
In Stock
$17.49
$12.63
You Save: 28%

sku: 2490-3015, mpn: NP12DE, ean: 0051218470024,

4.7 out of 5 stars with 129 reviews
This item is Vaughan & Bushnell NP12DE Double End Nail Puller . Used for Handtools & Tool Organizers, Nail Pullers. The produt is manufactured in United States.This item is Vaughan & Bushnell NP12DE Double End Nail Puller. Used for Handtools & Tool Organizers, Nail Pullers. The produt is manufactured in United States. Sharpened, polished and hardened claws offset at 30 degrees and 90 degrees. Forged high carbon steel, 5/8'' hex stock. Blue, rust resistant finish. 11'' shank length. Weighs 16


CS Osborne (121,124,120-1/2,600) Tack Staple Nail Remover Pliers - Furniture Upholstery Tools - DIY - Made in the USA
By UJ Ramelson Co
In Stock
$73.95

mpn: x4removers,

4.9 out of 5 stars with 74 reviews
C.S. OSBORNE & CO. - #124 Remover - Forged from alloy tempered steel. A consistently made Osborne quality product. Carefully hardened for long lasting use. Hardwood handle with nickel plated ferrule. #120-1/2 Lifter - The correct angle for removing staples of any size, from the smallest to the longest leg staples. Manufactured from alloy tempered steel. Electronically hardened working ends. Fluted amber cellulose acetate handle to keep from rolling. #121 Tack Remover -Used for grooving out


OCM 12" HEAVY DUTY PROFESSIONAL DOUBLE ENDED CATS PAW, NAIL PULLER, BEAR CLAW, PRY BAR
By OCM
In Stock
$11.99

mpn: NP1, ean: 0714343978192,

4.7 out of 5 stars with 17 reviews
The Professionals Choice, This OCM 12-Inch Claw Bar is Made of Forged High-Carbon Alloy Steel for Long Life and Is Tempered for Strength and Durability. Its Flat Striking Surface and Ground Beveled Claws Allow the Tool to Be Driven Deeply Under Hard to Access Embedded Nails. It is the Ideal Choice for Precise Nail Extraction in the Roofing, Demolition, Flooring, Framing and Construction Trades. The OCM Cats Paw Is So Strong, It Can Extract Hardened And Stainless Steel Nails with Ease. It Can Be


C.S.Osborne &Co. No. 601 Antique Nail Plier (MPN #54212)
By C. S. Osborne & Co.
In Stock
$32.74

mpn: 54212, ean: 0736902255230,

4.3 out of 5 stars with 24 reviews
C.S.Osborne & Co. No. 601 Antique Nail Plier. (MPN #54212) Hardened steel, top quality. Very convenient size for removing antique nails. Unique design welded pin gives leverage when pulling out the antique nails without effort, letting the tool do the job. 1 3/4 Inch Jaw Width. 7 Inch Overall Length. 6 Ounces. Made in the United StatesA. to last.C.S.Osborne &Co. No. 601 Antique Nail Plier. 1 3/4 Inch Jaw Width. 6 Ounces. 7 Inch Overall Length.. MPN #54212, Crafted in the United StatesA. to



Viewing Page 2 of 5

View more products in Hand Tools.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.