Lifting Cranes - Page 2 - Extreame Savings! Save up to 48%


Extreame Savings! Up to 48% off on Lifting Cranes at Historic Charles Street, Page 2. Top brands include Titan Attachments, uxcell, Vestil, & JIB. Hurry! Limited time offers. Offers valid only while supplies last.



Titan 1/2 Ton Push Beam Trolley For I Beam Gantry Crane Hoist Winch Shop .5 Half
Titan 1/2 Ton Push Beam Trolley For I Beam Gantry Crane Hoist Winch Shop .5 Half
By Titan Attachments
In Stock
$57.00

mpn: 05PTROLLEY, ean: 0049008264021,

4.7 out of 5 stars with 146 reviews
The Titan 1/2 Ton Push Trolley is designed to be attached to the flange of steel beams or gantry cranes to act as a lifting point for chain blocks, hoists, and lifting tackle. The included washers can be moved to either side of the main brackets to adjust the width.Features:- Fits beams 2'' to 6'' in width.- Castle nut secures the trolley in place.- Fully adjustable spacers included for a secure fit.- Safe Working Load Rated for 1/2 ton capacity (1,000 LB).- Solid Steel


Uxcell a16062200ux0500 Crane Pulley Block M15 Lifting Crane Swivel Hook single Pulley Block Hanging Wire Towing Wheel 10Pcs
Uxcell a16062200ux0500 Crane Pulley Block M15 Lifting Crane Swivel Hook single Pulley Block Hanging Wire Towing Wheel 10Pcs
By uxcell
In Stock
$39.34
$20.35
You Save: 48%

mpn: a16062200ux0500, ean: 0709874029840,

4.6 out of 5 stars with 90 reviews
A crane pulley block is a kind of hoisting tool, also called a Sheave, is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present. Pulleys are used to change the direction of an applied force, transmit rotational motion, or realize a mechanical advantage in either a linear or rotational system of motion.Designed for use with rope or cord in


Vestil AHS-4-15-14 Steel Adjustable Height Gantry Crane, 4000 lbs Capacity,  15' Length x 8'' Height Beam, 102''-168'' Usable Height
Vestil AHS-4-15-14 Steel Adjustable Height Gantry Crane, 4000 lbs Capacity, 15' Length x 8" Height Beam, 102"-168" Usable Height
By Vestil
In Stock
$2,923.00

mpn: AHS-4-15-14, ean: 0691215001533,

4.7 out of 5 stars with 131 reviews
Vestil adjustable height gantry crane. Industrial steel gantry cranes are designed for transporting and positioning materials. Solid steel construction will provide years of service. Large 8-inches diameter locking phenolic casters with roller bearings will facilitate easy mobility from one area to another when unloaded. Height is adjustable in 6-inches increments. Blue finish. More economical and flexible than permanent cranes. Features quick setup design. Hoist and trolley sold separately.


Vestil WTJ-4-G  Galvanized Steel Winch Truck Jib Crane, 1000 lb Extended Capacity, Extended Usable Reach 49-1/4'', Extended Maximum Hook Height 105'', Silver
Vestil WTJ-4-G Galvanized Steel Winch Truck Jib Crane, 1000 lb Extended Capacity, Extended Usable Reach 49-1/4", Extended Maximum Hook Height 105", Silver
By Vestil
In Stock
$399.99
$374.99
You Save: 6%

mpn: WTJ-4-G, ean: 0691215096898,

4.4 out of 5 stars with 101 reviews
This Galvanized Winch Operated Truck Jib Crane lifts items from ground to truck bed height, then rotate into cargo area. Includes telescopic boom design with manual hydraulic hand pump to pivot boom up and down. Manual cable winch to lift and lower loads. Unit comes with one grab hook, one chain slot lock, and one sling hook with latch. Unit is designed for vertical lifting only. Do not use unit for lifting personnel or overhead lifting.Powered cable winch makes lifting and maneuvering easy.


Vestil VAN-J-DC Van Mount DC Powered Jib Lifter, Steel, 400 lb. Capacity, 46' Cable Length, 46-1/16'' Height
Vestil VAN-J-DC Van Mount DC Powered Jib Lifter, Steel, 400 lb. Capacity, 46' Cable Length, 46-1/16" Height
By Vestil
In Stock
$689.99
$649.99
You Save: 6%

mpn: VAN-J-DC, ean: 0691215044691,

4.5 out of 5 stars with 87 reviews
This Vestil VAN-J-DC van mount rotating jib lifter is for lifting loads up to 400 lb. from the ground and moving them into a van's cargo area. It has an electric winch powered by a 12V DC battery (sold separately) and a 46' cable with swivel hook for raising and lowering the load, and the arm is rotated manually up to 360 degrees for moving the load into the van. The winch is operated with a handheld controller that has a constant-pressure pushbutton for safety. The maximum span of the arm is


Vestil WTJ-20-4-DC 12V DC Power Lift Jib Crane, Steel, 2000 lb. Capacity, 46' Cable Length, 68-13/16'' Height
Vestil WTJ-20-4-DC 12V DC Power Lift Jib Crane, Steel, 2000 lb. Capacity, 46' Cable Length, 68-13/16" Height
By Vestil
In Stock
$2,429.99
$2,299.99
You Save: 5%

mpn: WTJ-20-4-DC, ean: 0691215048354,

4.3 out of 5 stars with 104 reviews
This Vestil WTJ-20-4-DC power lift jib crane is a freestanding, rotating steel crane with a maximum capacity of 2,000 lb. for use in warehouses and on truck beds and loading docks. It has an electric winch powered by a 12V DC battery (sold separately) and a 46' cable with swivel hook for raising and lowering the load, and the arm can be rotated manually up to 360 degrees. The winch is operated with a handheld pendant controller that has a constant-pressure pushbutton for safety. A bench top


Vestil FHS-4-10 Fixed Height Steel Gantry Crane, 4000 lbs Capacity, 10' Length x 8'' Height Beam
Vestil FHS-4-10 Fixed Height Steel Gantry Crane, 4000 lbs Capacity, 10' Length x 8" Height Beam
By Vestil
In Stock
$1,029.99
$969.99
You Save: 6%

mpn: FHS-4-10,

4.0 out of 5 stars with 126 reviews
Vestil Industrial steel gantry cranes are designed for transporting and positioning materials. Solid steel construction will provide years of service. Large 8-inches diameter locking phenolic casters with roller bearings will facilitate easy mobility from one area to another when unloaded. More economical and flexible than permanent cranes. Features quick setup design. Hoist and trolley sold separately. Blue finish. Beam measures 10-feet length by 8-inches height. 10-feet under I-beam to


Vestil VAN-J Van Mount Manual Jib Lifter, Steel, 400 lb. Capacity, 10' Cable Length, 46-1/16'' Height
Vestil VAN-J Van Mount Manual Jib Lifter, Steel, 400 lb. Capacity, 10' Cable Length, 46-1/16" Height
By Vestil
In Stock
$765.53

mpn: VAN-J,

4.0 out of 5 stars with 115 reviews
This Vestil VAN-J van mount rotating jib lifter is for lifting loads up to 400 lb. from the ground and moving them into a van's cargo area. It has a hand-cranked winch and a 10' cable with swivel hook for raising and lowering the load, and the arm rotates up to 360 degrees for moving the load into the van. The maximum span of the arm is 39-3/4'', and the arm has a double pivot for use in restricted spaces. The lifter has a height of 46-1/16'', the height from the van floor to the raised hook is


Vestil FPG-6 Work Area Portable Steel Gantry Crane, 600 lbs Capacity
Vestil FPG-6 Work Area Portable Steel Gantry Crane, 600 lbs Capacity
By Vestil
In Stock
$862.00

mpn: FPG-6,

4.8 out of 5 stars with 88 reviews
Vestil work area portable gantry crane. Designed to maximize material handling requirements in light-duty lifting applications. Lightweight fixed height design allows for easy mobility. Includes (4) 5-inches x 2-inches poly-on-steel swivel casters with brake. The straddle width is 68-inches. Overall I-beam length is 80-inches with a usable length of 70-inches. Do not move units while loaded. Steel construction with powder coat finish. Bolt together installation. Hoist and trolley sold


Vestil WTJ-2 Winch Operated Truck Jib Crane, Welded Steel, 1000 lbs Retracted Capacity, 56'' Overall Height, Yellow
Vestil WTJ-2 Winch Operated Truck Jib Crane, Welded Steel, 1000 lbs Retracted Capacity, 56" Overall Height, Yellow
By Vestil
In Stock
$269.99

mpn: WTJ-2, ean: 0691215048330,

4.7 out of 5 stars with 124 reviews
The Vestil WTJ-2 truck-mounted jib crane is a welded-steel, manual cable winch-operated, 360-degree crane with a telescoping boom for lifting loads into the bed of a pickup truck. The telescoping boom offers a longer horizontal reach than jib cranes with a single-length boom. It has a load capacity of 1000 lbs. with the boom retracted and a capacity of 500 lbs. with the boom fully extended. A manual cable winch with a 1/4'' cable lifts loads up and down, and a hydraulic hand pump rotates the


JIB UCT208-24JIB Take Up Ball Bearing, Steel
By JIB
In Stock
$29.68

mpn: UCT208-24JIB,

4.7 out of 5 stars with 110 reviews
New in factory box - uct208-24 JIB new ball bearing take up. Products are made in China. JIB brand products and manufactured by JIB.Product type: ball bearing take up. Made in china. UCT208-24JIB series product.


Titan 1 Ton Push Beam Trolley For I Beam Gantry Crane Hoist Winch Shop
Titan 1 Ton Push Beam Trolley For I Beam Gantry Crane Hoist Winch Shop
By Titan Attachments
In Stock
$69.99

mpn: 1PTROLLEY, ean: 0049008264038,

4.1 out of 5 stars with 100 reviews
The Titan 1 Ton Push Trolley is designed to be attached to the flange of steel beams or gantry cranes to act as a lifting point for chain blocks, hoists, and lifting tackle. The included washers can be moved to either side of the main brackets to adjust the width.Features:- Fits beams 2-1/2'' to 8'' in width.- Castle nut secures the trolley in place.- Fully adjustable spacers included for a secure fit.- Safe Working Load Rated for 1 ton capacity (2,000 LB).- Solid Steel



Viewing Page 2 of 2

View more products in Material Handling.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.