Joint Calipers & Dividers - Page 3 - Extreame Savings! Save up to 44%


Extreame Savings! Up to 44% off on Joint Calipers & Dividers at Historic Charles Street, Page 3. Top brands include Starrett, Prettyia, TESA Brown & Sharpe, Taylor Toolworks, Moore & Wright, HHIP, Aime Ledin, & General Tools. Hurry! Limited time offers. Offers valid only while supplies last.



Starrett 79B-4 Spring Nut Outside Spring Caliper, Steel, Flat Leg, 0-4" Range
By Starrett
In Stock
$56.00
$44.56
You Save: 20%

mpn: 79B-4, ean: 0049659503654,

4.9 out of 5 stars with 95 reviews
The Starrett 79B-4 “Yankee” spring-type outside caliper opens to 4” (100 mm) with sturdy construction and smooth action. The threads of the spring nut firmly engage the screw with pressure from the leg. When pressure is withdrawn, the nut automatically releases itself and slides freely over the screw, saving time in opening and closing. It is made of flat stock, high-grade steel, for easily reproducible and accurate transfer of measurements of the external size of an object. This caliper


Prettyia 6'' Car Wheel 3-Paw Car Bearing Puller Bushing Gear Extractor Tool Kit Heavy Duty
By Prettyia
In Stock
$25.99

mpn: 210a844aa377dc7868e14b7fe861dd32, ean: 0705220201175,

4.1 out of 5 stars with 145 reviews
Description: - Three jaws bearing gear puller installation remover hand tool kit for car. (Can be combined to 2-Jaw puller) - Used to process steel parts which are difficult to make - Easy to use: can be rotated from the center of plunger and will soon be able to touch the work center that is pulled - Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage - Can be disassembled or assembled freelySpecification: - Material: straight


Brown & Sharpe 599-814-10 Spring Nut Outside Spring Caliper, Stainless Steel, Flat Leg, 0-10" Range
By TESA Brown & Sharpe
In Stock
$35.00
$34.71

mpn: 599-814-10, ean: 0622419460437,

4.2 out of 5 stars with 132 reviews
US Made. Precision finished, finely balanced tools. Strong, flexible spring for smooth, even action.599-814-10.


Starrett 563-6 Hermaphrodite Joint Caliper, Steel, Flat Leg, 0-6" Range
By Starrett
In Stock
$66.00

mpn: 563-6, ean: 0049659525724,

4.7 out of 5 stars with 106 reviews
The Starrett 563-6 hermaphrodite caliper with straight legs has a leg length of 6” (150 mm) but opens to approximately one-third larger than the leg length. The joint allows for tension adjustment, while the tension will not change if the legs move. Hermaphrodite calipers are used to scribe lines parallel to the workpiece edge, locating and testing centers, and other layout work. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step


Toolmaker's “Yankee” Quick-Spring Nut, Rapid Adjust, Spring Dividers Calipers Compass, 0-8.5” / 215 mm Range, Brass Fulcrum and Fine Adjustment Mechanism, Flat Leg, C7-8
By Taylor Toolworks
In Stock
$14.99

mpn: C7-8, ean: 0791617730847,

4.2 out of 5 stars with 40 reviews
Dividers are used for measuring and transferring precise distances between two points and for drawing arcs and circles. These dividers are made from high-grade carbon steel with hardened and finely ground points. They feature a quick-spring nut for rapid and precise fine adjustments that will securely hold any measurement. Adjustment mechanism is central located to assure smooth action. Fulcrum and adjustment mechanism are brass. ''Yankee'' style flat-leg construction makes unit very durable.


Starrett 243-6 Hermaphrodite Joint Caliper, Steel, Flat Leg, 0-6" Range
By Starrett
In Stock
$62.00
$57.58
You Save: 7%

mpn: 243-6, ean: 0049659511437,

4.4 out of 5 stars with 108 reviews
The Starrett 243-6 hermaphrodite caliper with bent leg has a leg length of 6” (150 mm) but opens to approximately one-third larger than the leg length. The joint allows for tension adjustment, while the tension will not change if the legs move. Hermaphrodite calipers are used to scribe lines parallel to the workpiece edge, locating and testing centers, and other layout work. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step


250mm/ 10inch Spring Outside Calipers - Moore and Wright
By Moore & Wright
In Stock
$12.44

mpn: 5210, ean: 5055396137842,

4.0 out of 5 stars with 150 reviews
250mm/ 10inch Spring Outside Calipers. Moore and Wright was Founded in 1906 by innovative young engineer Frank Moore. Moore & Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineer’s tools.Bow spring ensures uniform tension over working range.. Centrally mounted adjustment screw


Starrett 42-6 Hermaphrodite Joint Caliper, Steel, Flat Leg, 0-6" Range
By Starrett
In Stock
$169.00
$145.12
You Save: 14%

mpn: 42-6, ean: 0049659502633,

4.9 out of 5 stars with 67 reviews
The Starrett 42-6 lock-joint hermaphrodite caliper with straight legs has a leg length of 6” (150 mm) but opens to approximately one-third larger than the leg length. The joint allows for tension adjustment, while the tension will not change if the legs move. Hermaphrodite calipers are used to scribe lines parallel to the workpiece edge, locating and testing centers, and other layout work. Calipers measure the distance between two opposing sides of an object. They make inside, outside,


HHIP 4901-0069 Spring Divider, 12"
By HHIP
In Stock
$17.90

mpn: 4901-0069, ean: 0769053050652,

4.7 out of 5 stars with 17 reviews
Easy adjustment over entire range. Balanced legs, uniform tension. Polished natural steel finish. 12 inches.Easy adjustment over entire range. Balanced legs, uniform tension. Polished natural steel finish.


Starrett 26-12 Outside Joint Caliper, Steel, Flat Leg, 0-12" Range
By Starrett
In Stock
$78.00

mpn: 26-12, ean: 0049659501896,

4.0 out of 5 stars with 76 reviews
The Starrett 26-12 improved firm-joint outside caliper has a leg length of 12” (300 mm) but opens to approximately one-third larger than the leg length. The joint allows for tension adjustment, while the tension will not change if the legs move. The legs are made from a high-grade steel and are ruggedly constructed and well-finished. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers


Ledin 6 ½” 170 mm French La Cible Forged Firm Joint Dividers Compass, Locking Mechanism, Round Leg, Hardened Points CC160/04
By Aime Ledin
In Stock
$28.99

mpn: CC160/04, ean: 0791617732391,

4.4 out of 5 stars with 16 reviews
Made to exacting standards in St Etienne France by Aime Ledin Construction Mecanique Aime Ledin has been making industrial quality measuring tools since 1902. This pair of dividers are made from high carbon steel that is first forged and then machined to provide maximum strength and rigidity. The double box joint is hot riveted and will move smoothly and hold settings. Has locking quadrant mechanism with integrated stop. Fashioned with round legs to improve overall aesthetics and comfort while


Starrett 83A-8 Solid Nut Dividers, Steel, Flat Leg, 0-6" Range
By Starrett
In Stock
$89.00
$50.15
You Save: 44%

mpn: 83A-8, ean: 0049659503807,

4.5 out of 5 stars with 134 reviews
The Starrett 83A-8 “Yankee” spring-type divider caliper opens to 8” (200 mm) with sturdy construction and smooth action. It is made of flat stock, high-grade steel, for easily reproducible and accurate transfer of measurements, scribing lines, arcs, and circles, and marking distances between two points. This caliper has flat, straight legs and comes with a solid nut. Bow spring is flexible yet strong, for reliability. The centrally located adjustment rod ensures smooth action when


3 Piece Set Toolmaker's “Yankee” Spring Dividers, Inside ID & Outside OD Calipers, Solid Nut, 0-6.5” / 165 mm Range, Fine Adjustment Mechanism, Flat Leg,C1-6/C2-6/C3-6
By Taylor Toolworks
In Stock
$25.99

mpn: C1-6/C2-6/C3-6, ean: 0791617730953,

4.6 out of 5 stars with 122 reviews
Spring dividers and calipers (ID and OD) are used for measuring and transferring precise measurements. They are used by multiple professionals. These dividers/calipers are made from high-grade carbon steel with hardened and finely polished points. They feature a solid nut for precise fine adjustments that will securely hold any measurement. Adjustment mechanism is central located to assure smooth action. ''Yankee'' style flat-leg construction makes units very durable. They have a substantially


Starrett 73A-4 Solid Nut Inside Spring Caliper, Steel, Flat Leg, 0-4" Range
By Starrett
In Stock
$51.00
$32.84
You Save: 36%

mpn: 73A-4, ean: 0049659503340,

4.7 out of 5 stars with 63 reviews
The Starrett 73A-4 “Yankee” spring-type inside caliper opens to 4” (100 mm) with sturdy construction and smooth action. It is made of flat stock, high-grade steel, for easily reproducible and accurate transfer of measurements of the internal size of an object. This caliper has flat, outward curving legs for inside measurements and comes with a solid nut. Bow spring is flexible yet strong, for reliability. The durable legs are made of flat stock, high-grade steel for long life. The


General Tools 450-8 Flat Leg Divider, 8-Inches
By General Tools
In Stock
$25.12
$19.67
You Save: 22%

mpn: 450-8, ean: 0069060292817,

4.6 out of 5 stars with 147 reviews
General Tools flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal. The forged steel legs feature hardened points for precise marking of the work piece; An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment. Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this flat leg divider. This flat


Ledin Toolmaker’s 8 ”/220 mm French La Cible “Yankee” Dividers Compass, Quick Speed Nut, Rapid Adjust, Black Gun Metal Finish, Flat Leg, Hardened Points, Fine Adjustment Mechanism CO200B19
By Aime Ledin
In Stock
$23.99

mpn: CO200B19, ean: 0791617732513,

4.4 out of 5 stars with 13 reviews
Made to exacting standards in St Etienne France by Aime Ledin Construction Mecanique Aime Ledin has been making industrial quality measuring tools since 1902. This pair of dividers is made from high-grade carbon steel with hardened and finely ground points. They feature a quick-spring nut for rapid and precise fine adjustments that will securely hold any measurement. The adjustment mechanism is centrally located to assure smooth action. Contains a universal pencil holder. The robust ''Yankee''


Starrett spring nut Inside Spring Calipers, Steel, 0"/0mm-6"/150mm Range
By Starrett
In Stock
$89.00
$52.00
You Save: 42%

mpn: 73B-12, ean: 0049659503432,

4.4 out of 5 stars with 94 reviews
The Starrett 73B-12 “Yankee” spring-type inside caliper opens to 12” (300 mm) with sturdy construction and smooth action. It is made of flat stock, high-grade steel, for easily reproducible and accurate transfer of measurements of the internal size of an object. This caliper has flat, outward curving legs for inside measurements and comes with a solid nut. Bow spring is flexible yet strong, for reliability. The durable legs are made of flat stock, high-grade steel for long life. The


Starrett 27-12 Inside Joint Caliper, Steel, Flat Leg, 0-12" Range
By Starrett
In Stock
$74.00
$69.37
You Save: 6%

mpn: 27-12, ean: 0049659501964,

4.8 out of 5 stars with 107 reviews
The Starrett 27-12 improved firm-joint inside caliper has a leg length of 12” (300 mm) but opens to approximately one-third larger than the leg length. The joint allows for tension adjustment, while the tension will not change if the legs move. The legs are made from a high-grade steel and are ruggedly constructed and well-finished. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers


Starrett Outside Joint Calipers, Flat Leg, Steel, 0"/0mm-12"/300mm Range
By Starrett
In Stock
$1,386.18

mpn: 38-12, ean: 0049659502541,

4.8 out of 5 stars with 15 reviews
The Starrett lock-joint outside caliper with fine adjustment opens to approximately one-third larger than the leg length. Legs are made from high-grade steel for durability. The joint is locked by turning a large knurled disc after the legs have been set to approximate size. Then the knurled adjusting nut can be turned to make final adjustments. The spring washer under the disc maintains proper leg tension when the joint is loosened. This caliper's inwardly curving leg tips are suitable for


Toolmaker's “Yankee” Quick-Spring Nut, Rapid Adjust, Spring Dividers Calipers Compass, 0-12.5” / 317 mm Range, Brass Fulcrum and Fine Adjustment Mechanism, Flat Leg, C7-12
By Taylor Toolworks
In Stock
$17.99

mpn: C7-12, ean: 0791617730861,

4.1 out of 5 stars with 28 reviews
Dividers are used for measuring and transferring precise distances between two points and for drawing arcs and circles. These dividers are made from high-grade carbon steel with hardened and finely ground points. They feature a quick-spring nut for rapid and precise fine adjustments that will securely hold any measurement. Adjustment mechanism is central located to assure smooth action. Fulcrum and adjustment mechanism are brass. ''Yankee'' style flat-leg construction makes unit very durable.



Viewing Page 3 of 5

View more products in Calipers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.