Browse Our Catalog

Chisels - Page 4 - Extreame Savings! Save up to 41%


Extreame Savings! Up to 41% off on Chisels at Historic Charles Street, Page 4. Top brands include Narex, Dasco Pro, DASCO, Bosch, Neiko, GIDABRAND, Matsumura, TEKTON, mapsyst, IVY Classic, Windsor Design, VANQUISH, & HDDU. Hurry! Limited time offers. Offers valid only while supplies last.



Narex Czech Steel 4 piece set 8 mm (5/16"), 10 mm (3/8"), 16 mm (5/8") , 32 mm (1 1/4") mm Woodworking Chisels 863110
By Narex
In Stock
$38.99

mpn: 863110, ean: 0700667462806,

4.3 out of 5 stars with 123 reviews
These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a Premium 8 piece set contains the following sizes: 8 mm (5/16''), 10 mm (3/8''), 16 mm and 32 (1 1/4'') mm. They are


Dasco Pro 439 Carbon Steel Brick Set, 5-Inch
By Dasco Pro
In Stock
$13.98
$8.73
You Save: 38%

mpn: 439, ean: 0018371004398,

4.3 out of 5 stars with 27 reviews
Dasco Pro brick sets are designed for scoring, cutting and trimming bricks and blocks. Made of high carbon steel that has been heat treated, these chisels feature a sharp, durable cutting edge for years of use. Dasco Pro, Inc. offers a broad range of forged hand tools used for carpentry, masonry, and demolition. Our 89 year legacy brand incorporates time tested design, superior materials, and distinguishing technology. Construction professionals, home improvement enthusiasts and hobbyists alike


Dasco 417 1-Inch by 7-7/8-Inch High Carbon Steel Cold Chisel
By DASCO
In Stock
$14.47
$10.05
You Save: 31%

mpn: 417, ean: 0743153361047,

4.7 out of 5 stars with 92 reviews
Dasco Pro cold chisel is precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.1-inch width. Used for cutting and shaping metal. Always wear eye protection. Made in the USA.


Bosch HS1503 3 x 12 In. Scaling Chisel 3/4 In. Hex Hammer Steel
By Bosch
In Stock
$29.60
$17.59
You Save: 41%

mpn: HS1503, ean: 0000346245585,

4.0 out of 5 stars with 93 reviews
Bosch offers a full assortment of 3/4 In. hex hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased efficiency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treat process.Scaling chisel. 3/4 In. hex shank. Concrete and masonry demolition. One-piece design.


Neiko 02616A Chrome Vanadium Steel Multi-Use Interchangeable Punch and Chisel Set (13 Piece), Clear
By Neiko
In Stock
$39.88
$38.10
You Save: 4%

mpn: 02616A, ean: 0837013026167,

4.8 out of 5 stars with 97 reviews
The Neiko 02616A Punch and Chisel Set includes: (1) Quick change CrMo easy grip handle (5) Flat chisels (13, 16, 19, 22, 25 mm) (1) Cape chisel (6 mm) (2) Taper punches (2) Pin punches (2) Center punchesConstructed of high quality grade Cr-V steel for durability, preventing wear outs and allowing for cutting edge performance. Multi-use automotive tool helps with removing bearings, suspension bolts, and roll pins. Quick change, easy grip handle is ergonomic and convenient for switching between


Professional Wood Chisel Set with Tools Roll Bag – Carving & Woodworking Equipment with Chrome Vanadium Steel Blades & Ergonomic hardwood Handles – Sizes 6mm, 13mm, 18mm, 24mm (1/4”, 1/2”, 3/4”, 1”)
By GIDABRAND
In Stock
$29.99
4.6 out of 5 stars with 36 reviews
Professional And Amateur Woodworkers, This One's For You! Are you an experienced carpenter? Is woodworking your hobby? Do you need wood carving tools for a DIY project? If you have answered ''yes'' to one of the questions above, it means you're looking for a professional wood chisel set. Our woodworking chisel set includes 4 wood carving chisels and their sizes are 6mm, 13mm, 18mm, and 24mm (or 1/4'', 1/2'', 3/4'', 1''). These four woodworking tools are also ideal for carving wax, candles, ice,


Matsumura Japanese White Steel Firmer Chisel - 15mm - 5/8"
By Matsumura
In Stock
$128.87

mpn: 156265,

4.9 out of 5 stars with 71 reviews
Firmer Chisels are used for carpentry and heavy cabinet and boat work. They are longer and made to a heavier pattern than are the Bench Chisels. Mr. Matsumura uses the Hokkaido Pattern to give our Firmer Chisels a fine balance and provide the user with excellent control. Each blade is hand-forged from the best quality ''white'' steel laminated to wrought iron. The blades are tempered to Rc 64 and are finished in the traditional fashion. The handles are best quality Akagashi (Japanese Red


Narex 6 Piece Set Carving Chisels with 3 Knives , one straight chisel, gouges and V Tool 894610
By Narex
In Stock
$69.95

mpn: 894610, ean: 0700667462950,

4.4 out of 5 stars with 105 reviews
This 6 piece carving chisel set is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. The set contains 6 tools: 3 knives (large carving knife with 1 7/8'' blade, chip carving knife and small detail knife), straight chisel 1/2'' wide, straight gouge 3/8'' wide and V tool 1/4'' wide. Blades are made from highly allowed Cr-Mn steel and heat treated to HRc 55. Chisel handles are European Beech with an octagonal cross section. Knife blades


TEKTON 3/4-Inch x 12-Inch Long Cold Chisel | 66207
By TEKTON
In Stock
$12.60

mpn: 66207, ean: 0020209017593,

4.1 out of 5 stars with 63 reviews
To cut cast iron, steel, brass, bronze, copper, and aluminum when a torch or saw won't do, use the TEKTON 3/4 inch long cold chisel. The generous 12-inch length reaches past obstructions and into narrow spaces that standard chisels can't while still Offering the room for you to grip it with your whole hand. It neatly cuts off rivet heads and rusted bolts and cleans up after drilling or welding by removing burrs, waste, and slag. Made from premium high-carbon steel, each chisel is individually


Dasco 420 1-Inch by 18-Inch High Carbon Steel Long Cold Chisel
By DASCO
In Stock
$25.10
$22.29
You Save: 11%

mpn: 420, ean: 0743153361115,

4.6 out of 5 stars with 7 reviews
Dasco Pro long cold chisel is precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.1-inch width. Used for cutting and shaping metal. Always wear eye protection. Made in the USA.


Curved Bowl Adze - Big Curve - Steel 4150!!!
By mapsyst
In Stock
$56.00

mpn: map-4092, ean: 0753807414593,

4.7 out of 5 stars with 131 reviews
Cast and after that forged and tempered sculpting, wood carving and a wood working BIG CURVE BOWL adze. It combines sharp blade and claw hammer. The whole in the center is for pulling nails. Very useful and well balanced. Very sharp and durable blade. AISI-4150 HRC 50-55 !!! Traditional use of the adze is for removing bark and trimming or shaping timber. Authentic log home builders, as well as traditional shipbuilders, make use of the adze. Artists and sculptors use various sizes of adzes for


Bosch HS1475 10 In. Gouging Chisel SDS-plus Bulldog Hammer Steel
By Bosch
In Stock
$16.97
$11.33
You Save: 33%

mpn: HS1475, ean: 0000346341454,

4.9 out of 5 stars with 105 reviews
Bosch offers a full assortment of SDS-plus hammer steel points and chisels. Uniform steel over the length of bit. For use with rotary hammers.SDS-plus hammer steel chisel. Proprietary heat treat process. Typical application includes rough wood removal. For digging, cutting or shaving wood.


IVY Classic 48082 SDS Max 1 x 12-Inch Flat Chisel, Chrome Molybdenum Steel, 1/Card
By IVY Classic
In Stock
$13.56

mpn: 48082, ean: 0738226480824,

4.1 out of 5 stars with 10 reviews
IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic SDS Max Chisels are designed for cutting brick, block, concrete and stone. Constructed from hardened and tempered chrome molybdenum alloy-steel, the chisel features a drop forged body with a sand-blasted finish. The optimal geometry of the chisel allows for long life. IVY Classic SDS Plus Chisels come in a variety of shapes and blade widths and fit all SDS Max


Narex 890403 260 mm 10-1/4” Straight Blade Drawknife Cr Steel 55 HRc. Overall Length 20-1/2”
By Narex
In Stock
$79.99

mpn: 890403, ean: 8590137904033,

4.3 out of 5 stars with 70 reviews
Narex Bystrice has been making high quality, hand-forged edge tools for near a century that are well known to discerning craftsman worldwide. Famous for their chisels and carving tools, Narex has recently expanded into the green woodworking tools market and now offers adzes, spoon knives and draw knives. These traditional drawknives from Narex can be used by timber framers, turners, carvers, carpenters and chair makers to quickly remove excess material to shape spindles, pegs, legs, carvings,


Matsumura Japanese White Steel Mortise Chisel - 6mm - 1/4"
By Matsumura
In Stock
$106.27

mpn: 156188,

4.7 out of 5 stars with 19 reviews
Mortise Chisels are made with a square section and a heavy body. They are intended for deep mortise work in carpentry and heavy cabinet work. Mr. Matsumura handforges these blades from ''white'' steel laminated to wrought iron and tempers each blade to Rc 64. The blades are finished in the traditional manner. The handles are hand-turned from best quality Akagashi (Japanese Red Oak), noted for its strength and endurance. The handles are double hooped to stand-up to heavy work. Each Mortise


Matsumura Japanese Blue Steel Bench Chisel - 30mm - 1-1/4"
By Matsumura
In Stock
$124.50

mpn: 156251, ean: 0753677554443,

4.5 out of 5 stars with 97 reviews
Aogami Hagane means ''blue steel'' and is more complex steel than Shirogami Hagane or ''white steel''. Edge tools made from ''blue steel'' give the most durable edge possible, particularly in hard, abrasive woods such as teak and exotic hardwoods. Each Blue Steel Bench Chisels forge-welded by hand from a combination of special Hitachi ''blue steel'' and wrought iron. After curing in charcoal for several days, they are then individually tempered to Rockwell c65. Every Blue Steel Bench Chisel is


Windsor Design 8 Piece High Speed Steel Wood Lathe Chisel Set
By Windsor Design
In Stock
$119.99

mpn: Win-2730, ean: 0792363697231,

4.8 out of 5 stars with 126 reviews
These lathe chisels are a delight to use for all kinds of custom woodworking. The chisels are crafted with high quality - Visit Harbor Freight Tools For More Information.High speed steel stays sharp longer than carbon steel. Smooth ash wood handles with lacquer finish. Brass ferrules prevent handles from splitting under pressure. Wood case;.


Narex Czech Steel Individual Professional Woodworking Cabinetmakers Mortise Chisel with Stained European Beech Wood Handle Sizes 4, 5, 6, 8, 10, 12, 14, 16 mm 811205-8112162 (14 mm=9/16")
By Narex
In Stock
$22.99

mpn: 811204-811212, ean: 0791617733077,

4.7 out of 5 stars with 91 reviews
These professional Narex mortise chisel blades are 5 7/8 inches long with primary bevels ground at 25 degrees. The blade widths taper .030 inches from tip to shoulder for sidewall clearance. The blade thickness tapers from 3/8 inch at the tip to 1/2 inch at the shoulder. Handles are stained Beech and are 6 1/8 inches long, are 1 1/2 inches in diameter and have an oval cross section for a good firm grip. The blades have a well-seated heavy steel tang and the handles have 2 steel ferrules to


VANQUISH 4611 High-Impact Steel Blade Wood Chisel Set, 3-Piece for Woodworking
By VANQUISH
In Stock
$25.98

mpn: 4611, ean: 0767615193274,

4.6 out of 5 stars with 127 reviews
The high impact wood chisel is the premier tool of choice when you need a reliable and powerful chisel. By constructing the steel cutting edge with high quality chrome vanadium steel, we’ve created a tool that is both sharp and able to retain cutting power and polish even after extended use. The reinforced split proof acetate handle creates a solid base for this tool, allowing it extended lifetime use and durability. Equipped with the high impact wood chisel is a Zinc alloy striking end that


Woodworker 1 - Inch Hollow Mortise Chisel Square Hole Drill Bits - Crafted from Quality Tool Steel - Made in Japan
By HDDU
In Stock
$142.51

ean: 0716788056008,

4.1 out of 5 stars with 23 reviews
Premium woodworking square hole bit Features: 1.The square chisel mortiser combines the cutting of a four-sided chisel with the action of a drill bit in the center, The bit clears out most of the material to be removed, and the chisel ensures the edges are straight and clean. 2.Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries. 3.Use: square hole drill / chisel angle is



Viewing Page 4 of 6

View more products in Hand Tools.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.