Caliper Gages - Page 3 - Blowout Sale! Save up to 61%


Blowout Sale! Up to 61% off on Caliper Gages at Historic Charles Street, Page 3. Top brands include G.S ONLINE STORE, Abbott, Elenest, Starrett, shang tools, ZIJIA, MeiLiio, uxcell, DDP, Mitutoyo, Ginode, Walfront, Fowler, Annhua, & Paradise Harbor. Hurry! Limited time offers. Offers valid only while supplies last.



G.S BRACKET HEIGHT GAUGE RED COLOR 3.5MM-5MM022 ORTHODONTIC INSTRUMENTS BEST QUALITY
By G.S ONLINE STORE
In Stock
$12.40

mpn: 4953353142209, ean: 4953353142209,

4.4 out of 5 stars with 79 reviews
G.S BRACKET HEIGHT GAUGE RED COLOR 3.5MM-5MM022 ORTHODONTIC INSTRUMENTS BEST QUALITY100% BRAND NEW AND HIGH QUALITY. COLOR : RED. G.S BRACKET HEIGHT GAUGE RED COLOR 3.5MM-5MM022 ORTHODONTIC INSTRUMENTS BEST QUALITY. MADE IN HIGH STAINLESS STEEL. SAME AS PICTURE.


2 Years Warranty Stainless Steel Welding Gauge Inch & Metric for Measurement of Pipe After Fit-up/Alignment Fit-Up Gap 32mm 37 1/2 in [ABBOTT]
By Abbott
In Stock
$17.80

mpn: pp360, ean: 0724453100635,

4.2 out of 5 stars with 17 reviews
Can be calibrated to NBS standard. Polished, bright and clean without burr, rust laser engraved line and will not rub off. Made of stainless steel, is not easy to bend, accuracy of reading. Measures internal alignment of pipe after fit-up/ alignment, bevel on end preparation,the crown heig. Measurements read in standard on one side, and metric on the opposite side.


Electronic Digital Vernier Caliper, with Extra-Large LCD Screen and 150mm 0-6" Inch/Metric/Fraction Conversion, Stainless Steel, IP54 Water Resistant
By Elenest
In Stock
$15.99

ean: 0606682234254,

4.2 out of 5 stars with 48 reviews
Features:1. LCD Digital Electronic Caliper Vernier Gauge Micrometer Tool. Made of hardened stainless steel. Internal, external and height dimensions can be easily and accurately measured. Linear capacitive measuring system;Base measuring function: Inside, outside, depth and step measuring. 2. Zero setting in any position. With a small locking thumb screw which locks the jaws in place.3. With easy to read large LCD display. Handy conversion chart at the back. An ideal tool for a broad range of


Starrett 1017-4 Caliper Gauge, Pointed Jaw, White Face, 0-2" Range, 0.001" Resolution
By Starrett
In Stock
$1,110.00
$977.00
You Save: 12%

mpn: 1017-4, ean: 0049659650914,

4.2 out of 5 stars with 28 reviews
The Starrett outside dial caliper gauge opens to 2'' with 0.001'' dial graduations, one full rotation equaling 0.1''. The gauge has carbide ball contacts for longer life and wear resistance. The deep opening reaches over the workpiece, such as in castings and sheet metal, to measure small sections of that workpiece. The retraction lever allows for one-handed use and gauge control, while a direct reading dial hand for accuracy. Dial indicators, also called dial gauges or probe indicators, are


2 Years Warranty 0-20mm Stainless Steel Welding Gauge Fan-shaped Sector Gage Ruler Weld Inspection [ABBOTT]
By Abbott
In Stock
$15.50

mpn: MG-11, ean: 0724453100666,

4.2 out of 5 stars with 98 reviews
Made by stainless steel. Brand new in bag.. A special measuring tool to measure the angle of weldments crevasse and the weld width, height, weld. Measures size range from 0 to 20mm. Widely applied for measuring welding parts such as boilers, bridges, shipbuilding, pressure vessels. With magnifer, the reading is more convenient, accurate and labor-saving.


Precision adjustable angle gauge,adjustable angle range: 0 degrees to 60 degrees
By shang tools
In Stock
$108.89

ean: 0611536010823,

4.0 out of 5 stars with 53 reviews
Specifications: KP30   H (height): 50mm             W (width): 30 mm L (length): 102 mmAdjustable angle gauge.


1PCS 250mm Steel Metal Firm Friction Joint Inside Straight Outside Bow Calipers Tools 250 x 15mm
By ZIJIA
In Stock
$10.43

ean: 0670534130063,

4.4 out of 5 stars with 60 reviews
Specifications: Material:Steel Metal Color:Silver Size:Totol 250 x 15mm / 9.84 x 0.59''''(L x W) Maximum width for each blade:15mm Weight:155g Features: External Caliper 2 Silver Metal Is Very Suitable For Measuring Inside And Outside Dimensions Of Objects. Strong Joint Calipers Use Friction In The Joints To keep The Legs Hold-on The Outside Caliper Measures The Thickness And Outer Diameter Of The Object, Inside Caliper Measures The Distance Between Object's Hole And The Surface . Usage: Take


Outdoor LED Garden Lights Solar Power,MeiLiio Stainless Steel Motion Sensor Wall Lamp,Super Bright Home Garden Solar Light,Waterproof Lighting Control Landscape/Fences/Garage/Pathway Lamp (White)
By MeiLiio
In Stock
$23.99

ean: 0783852596166,

4.7 out of 5 stars with 104 reviews
★Remember: It must be installed where the sun can reach, otherwise it cannot be used.Working Principle:☀ Solar lighting is based on the solar panel above it absorbs sunlight during the day and converts it into electricity and is stored in a rechargeable battery inside the lamp. ☀ When the sky is dark in the evening, the top solar panel will sense and light the lamp.Product Operation:☀ Installed in the place where solar energy shines, the lamp cover is buckled open, the inside switch is


uxcell 7.5M 25Ft Steel Plastic Self-retracting Measuring Tape Ruler Measure Tool
By uxcell
In Stock
$14.87

mpn: a16040700ux1008,

4.8 out of 5 stars with 64 reviews
Retractable and lock, just push the button, the tape will lock or automatically retract to the case.There is a black button on the side to keep the tape.Metal clip on base for you to clip the ruler tape to your belt or other things.Color: Black, Yellow; Scale: 7.5M/25Ft. Package Content: 1 x Measuring Tape; Weight: 326g. Material: Steel, Plastic; Product Name: Measuring Tape. Tape Width: 22mm/0.9''. Dimension: 85 x 82 x 40mm/3.3'' x 3.2'' x 1.6''(L*W*H).


DDP MICRO BOLEY GAUGE MATERIAL TEETH SIZE MEASUREMENT RESTORATIVE DENTAL STAINLESS STEEL INSTRUMENTS
By DDP
In Stock
$15.49

mpn: 613951020128, ean: 0613951020128,

4.1 out of 5 stars with 11 reviews
DDP MICRO BOLEY GAUGE MATERIAL TEETH SIZE MEASUREMENT RESTORATIVE DENTAL STAINLESS STEEL INSTRUMENTSDDP MICRO BOLEY GAUGE MATERIAL TEETH SIZE MEASUREMENT RESTORATIVE DENTAL STAINLESS STEEL INSTRUMENTS. MADE IN STAINLESS STEEL. SAME AS PICTURE. QUANTITY : 1. MADE BY DDP.


Mitutoyo 209-550 Caliper Gauge, Inch/Metric, Pointed Jaw, 0.1-0.49" Range, +/-0.0008" Accuracy, 0.0002" Resolution, Meets IP63/IP67 Specifications
By Mitutoyo
In Stock
$715.00

mpn: 209-550, ean: 0603908544494,

4.0 out of 5 stars with 40 reviews
The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have


Ginode 1Pack Round AWG SWG Wire Thickness Ruler Tool Stainless Steel Wire Gauge Measure Diameter Gauge with 1Pack Hi-Lo Welding Gauge Gage Test Ulnar Welder Inspection Gauge Tool Silver
By Ginode
In Stock
$22.99

ean: 0764560329277,

4.8 out of 5 stars with 82 reviews
▲1x AWG SWG Wire Thickness Ruler: ▲Specification: ● Material: stainless steel ● Color: silver, as picture shows ● 0-36 standard ● Inch Scale: 0.3125''-0.007'' ● Outer Diameter: approx. 8.4cm/ 3.31'' ● Gaging non-ferrous wire and metal such as copper, brass, etc ● Gaging uncoated sheet, plate iron and steel ▲1x Hi-Lo welding gauge: ▲Specification: ● Material: Stainless steel ● Color: Silver ● Size: (Approx.) 15.7cm x 6.3cm ● Type: Welding gauge inspection


Ginode 1Pack Round AWG SWG Wire Thickness Ruler Tool Stainless Steel Wire Gauge Measure Diameter Gauge with 1PC Bridge Cam Gage Test Inch & metric Welding Gauge Test Ulnar Welding Inspection Gauge
By Ginode
In Stock
$19.99

ean: 0764560329284,

4.6 out of 5 stars with 83 reviews
▲1x AWG SWG Wire Thickness Ruler: ▲Specification: ● Material: stainless steel ● Color: silver, as picture shows ● 0-36 standard ● Inch Scale: 0.3125''-0.007'' ● Outer Diameter: approx. 8.4cm/ 3.31'' ● Gaging non-ferrous wire and metal such as copper, brass, etc ● Gaging uncoated sheet, plate iron and steel ▲1x Bridge Cam Gage: ▲Specification: ● Material: Stainless steel ● Color: silver ● Angle of preparation: 0 to 60 degree angle ● Linear measurements up to


52pcs Thread Pitch Gauge SAE Stainless Steel Screw Pitch Measuring Tool (Metric&British Whitworth(52pcs))
By Walfront
In Stock
$14.59

mpn: Walfronteuow7kxg30-02,

4.3 out of 5 stars with 83 reviews
Applied to measure thread and external thread tooth pitch. The thread plug gauge, through quenching processing, strong hardness, head with a magnetic. Using rotary switch can be freely adjusted. Easy to use, light and delicate, with precise measurements and simple design, which can be widely used and durable. It is useful for checking tool angle while cutting threads in metal turning lathes. Specifications: Material: Stainless Steel Type(Optional): US (51 pcs):60 * 60mm/2.36 * 2.36''


Fowler 54-554-625 Internal Electronic Caliper Gage, 1.2-2" Measuring Range, 0.0005" Resolution, 0.0008" Accuracy
By Fowler
In Stock
$202.88
$78.83
You Save: 61%

mpn: 54-554-625-0, ean: 0646795148673,

4.9 out of 5 stars with 93 reviews
The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008''/0.02mm accuracy and.0005''/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential


Outdoor LED Garden Lights Solar Power,MeiLiio Stainless Steel Motion Sensor Wall Lamp,Super Bright Home Garden Road Solar Light,Waterproof Lighting Control Fences/Garage/Pathway Lamp (Warm White)
By MeiLiio
In Stock
$26.99

ean: 0783852596173,

4.0 out of 5 stars with 116 reviews
Working Principle:☀ Solar lighting is based on the solar panel above it absorbs sunlight during the day and converts it into electricity and is stored in a rechargeable battery inside the lamp. When the sky is dark in the evening, the top solar panel will sense and light the lamp.Product Operation:☀ Installed in the place where solar energy shines, the lamp cover is buckled open, the inside switch is opened, then the lampshade is installed, solar charging during the daytime and automatic


Annhua Dental Bone Caliper,Caliper Range 0-40 mm Measuring Statinless Steel Instrument
By Annhua
In Stock
$18.99

ean: 0717209386698,

4.9 out of 5 stars with 30 reviews
Measuring range 0mm-20 mm. Made of high quality stainless steel. Measurement in Centimeter and Millimeter. Accurate and reliable measurement results. Easy to use and read.


Fowler 54-554-622 Internal Electronic Caliper Gage, 0.200-1" Measuring Range, 0.005" Resolution, 0.0008" Accuracy
By Fowler
In Stock
$193.87
$163.80
You Save: 16%

mpn: 54-554-622-0, ean: 0646795148642,

4.1 out of 5 stars with 51 reviews
The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008''/0.02mm accuracy and 0.0002''/0.005mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential


Paradise Harbor 32 Blade Feeler Gauge Metric & SAE Dual Reading Combination Gap Thicknes Measure
By Paradise Harbor
In Stock
$10.69

ean: 0792603821815,

4.2 out of 5 stars with 82 reviews
Durable for use: Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion. Each measuring feeler gauge has 32 blades thickness; Fordable feeler gauges, easy and convenient to use and store. Dual marked for both SAE (Standard) and Metric measurements, Polished and hardened blades, can use for long time. Easy to get into tight spaces and check tolerances Can use in all engine work, it is a necessary and useful tool. Material: stainless steel, One Brass


Starrett 1019M-25 Caliper Gauge, Pointed Jaw, Yellow Face, 10-35mm Range, +/-2mm Accuracy, 0.025mm Resolution
By Starrett
In Stock
$627.00
$619.57
You Save: 1%

mpn: 1019M-25, ean: 0049659671209,

4.5 out of 5 stars with 94 reviews
The Starrett 1019M-25 internal dial caliper gauge opens from 25 mm to 75 mm with a 3-1/4” (approximately 80 mm) arm length, and has carbide ball contacts for longer life and wear resistance. The arms reach into the workpiece, such as in bores of castings and inside readings in fabrications, to easily measure small sections of that workpiece. The retraction lever allows for one-handed use and gauge control, while a direct reading dial hand is accurate. Dial indicators, also called dial gauges



Viewing Page 3 of 4

View more products in Calipers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.