Anchors - Blowout Sale! Save up to 54%


Blowout Sale! Up to 54% off on Anchors at Historic Charles Street. Top brands include Powers Fastening Innovations, Simpson Strong-Tie, Wej-It, TOGGLER, MKT, Hard-to-Find Fastener, RAW PRODUCTS CORP, HILTI, CONFAST, & Arrow Shed. Hurry! Limited time offers. Offers valid only while supplies last.



Powers Fastening Innovations 7206SD 1/4-Inch by 1-3/4-Inch Wedge-Bolt and Blue Tip Large Diameter Screw Anchor Carbon Steel, 100 Per Box
By Powers Fastening Innovations
In Stock
$26.11
$24.96
You Save: 4%

mpn: 7206SD, ean: 0075352771748,

4.2 out of 5 stars with 49 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Heavy duty screw anchor with a finished hex head. Designed for consistent and reliable performance in cracked and untracked concrete. 100 per box. Easy to identify


Simpson Strong Tie Wa75700 3/4-Inch by 7-Inch with 5-1/8-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 10-Piece
By Simpson Strong-Tie
In Stock
$30.13
$19.64
You Save: 35%

mpn: WA75700, ean: 0044315612312,

4.9 out of 5 stars with 109 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


Wej-It Ankr-TITE ATG Wedge Anchor, Carbon Steel, Galvanized Finish, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 5/8" Diameter, 7" Length, 4-1/2" Threaded Length (Pack of 10)
By Wej-It
In Stock
$29.03
$28.73
You Save: 1%

mpn: ATG5870, ean: 0013918055000,

4.1 out of 5 stars with 69 reviews
Wedge anchor provides a secure hold in solid masonry and uncracked concrete. Anchor consists of a galvanized carbon steel body, a zinc-coated carbon steel washer and nut, and a 304 stainless steel clip, which expands to secure the anchor in place as the nut is tightened. Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. Ultimate tensile strength is 9,527 lb. at 2-5/8'' embedment depth in 4,000-psi concrete with


Powers Fastening Innovations 07323 Power-Stud 1/2-Inch by 4-1/2-Inch Type 304 Stainless Steel Wedge Expansion Anchor, 50 Per Box
By Powers Fastening Innovations
In Stock
$114.40

mpn: 07323, ean: 0075352073231,

4.3 out of 5 stars with 18 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Fully threaded, wedge style anchor. Available in carbon steel and stainless steel. Powers Fastening Innovations.


TOGGLER SNAPTOGGLE BAL Long Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 2" to 9-1/2" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 50)
By TOGGLER
In Stock
$56.89
$54.18
You Save: 5%

mpn: 21049, ean: 0036296210496,

4.4 out of 5 stars with 28 reviews
The TOGGLER SNAPTOGGLE BAL Long toggle anchor provides a secure hold from within various hollow materials 2'' to 9-1/2'' thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16''-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2''. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and


TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 50)
By TOGGLER
In Stock
$31.25
$23.61
You Save: 24%

mpn: 25014, ean: 0036296250140,

4.3 out of 5 stars with 100 reviews
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8'' to 3-5/8'' thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4''-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2''. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will


MKT Steel Conset Masonry Screw Anchor, Hex Washer Head Faced, 3/16" Diameter x 1-1/4" Length (Box of 100)
By MKT
In Stock
$19.38

mpn: H3125, ean: 7147905868878,

4.1 out of 5 stars with 89 reviews
MKT Fastening steel conset masonry screw anchor. Commonly known as ''Tapcon''. Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads; hex head version offers 2 drive methods. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.Commonly known as ''Tapcon''. High


Hard-to-Find Fastener 014973237158 Concrete Stud Anchors, 3/8 x 3-1/2, Piece-6
By Hard-to-Find Fastener
In Stock
$14.17
$6.51
You Save: 54%

mpn: WAS-147-6, ean: 0014973237158,

4.3 out of 5 stars with 34 reviews
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get


Simpson Strong Tie WA62100SS All Stainless Steel Wedge Anchor with 5/8-Inch by 10-Inch with 2-Inch Thread, 10-Pack
By Simpson Strong-Tie
In Stock
$105.39

mpn: WA62100SS, ean: 0044315338915,

4.5 out of 5 stars with 113 reviews
The 303 Stainless Steel Wedge-All Anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout filled concrete masonry in corrossive environments. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths.One piece wrap around clip. 303 stainless steel. Threaded end is chamfered for added versatility. Most sizes feature full thread for added


Wedge Anchor 304 Stainless Steel - 3/8"-16 x 2-1/4" Qty-10
By RAW PRODUCTS CORP
In Stock
$24.00

mpn: 618930261875, ean: 0618930261875,

4.7 out of 5 stars with 89 reviews
Wedge Anchor 304 Stainless Steel - 3/8''-16 x 2-1/4'' Qty-10Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.. Wedge anchors can be used to fasten objects to concrete.. These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.. Wedge anchors cannot be used on brick or block..


Powers Fastening Innovations 05022S 3/8-Inch by 4-Inch Hex Head Lokbolt As All Steel Sleeve Anchor, 50 Per Box
By Powers Fastening Innovations
In Stock
$22.21

mpn: 05022S, ean: 0075352777009,

4.6 out of 5 stars with 116 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Pre-assembled single unit sleeve anchor available in carbon steel and stainless steel. Can be used in concrete block, brick and stone. Powers Fastening


Hilti KWIK Bolt TZ Expansion Anchor - 304 Stainless Steel - KB-TZ 1/2" x 4-1/2" - 387527 - Box of 20
By HILTI
In Stock
$249.95

mpn: 387527,

4.4 out of 5 stars with 19 reviews
Meets Ductility Requirements of ACI318 D.3.3 Product and Length Identification Mark Facilitates Quality Control and Inspection Hole Diameter: 1/2 in Anchor Length: 4-1/2 in Thread Length: 2-3/8 in Embed Depth (Nominal): 3-5/8 in Allowable Static Loads (Greater Than/Equal To 4000 psi Concrete): Tension (lb): 3383 Shear (lb): 3685 For Base Materials: Lightweight Concrete, Cracked and Uncracked Concrete, Light to Medium Weight Concrete over Metal Deck Anchor Material: AISI 304 Stainless Steel Box


MKT Sup-R-Stud 303/304 Stainless Steel Mechanical Wedge Anchor, 3/8"-16 Thread Size, 3/8" Diameter x 3-3/4" Length (Pack of 50)
By MKT
In Stock
$141.40
$140.67

mpn: 2738334, ean: 0082275447254,

4.8 out of 5 stars with 56 reviews
MKT Fastening Sup-R-Stud mechanical wedge anchor is made of 303/304 stainless steel. Required hole diameter equals anchor diameter. Excellent for setting immediately. Can be loaded immediately. Can be set in a bottomless hole. Simple installation. Nut and washer supplied in package. ROHS compliant. Concerns: do not use in brick or block, not advised for use where vibratory loads are high, oversize holes are detrimental and will reduce load performance. Approvals/listings: G.S.A. Spec FF-S-325C,


Powers Fastening Innovations 06172S 1/4 by 3-Inch Flat Head Lokbolt As Sleeve Anchor 304 Stainless Steel, 100 Per Box
By Powers Fastening Innovations
In Stock
$108.99

mpn: 06172S, ean: 0075352778631,

4.5 out of 5 stars with 64 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Pre-assembled single unit sleeve anchor available in carbon steel and stainless steel. Can be used in concrete block, brick and stone. 100 per box. Extension


CONFAST 5/16" x 3-1/2" Stainless Steel Wedge Anchor (100 per box)
By CONFAST
In Stock
$126.29

mpn: WAS516312,

4.6 out of 5 stars with 13 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 5/16'' hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is


Arrow Shed AK100 Concrete Anchor Kit
By Arrow Shed
In Stock
$39.99
$22.46
You Save: 44%

mpn: AK100, ean: 7241870670266,

4.8 out of 5 stars with 20 reviews
If you have a concrete slab as a base for your arrow building, consider the AK100 concrete anchor kit to help anchor the shed to the slab. The AK100 includes four steel corner gussets and perimeter claps that lag bolt directly to the slab. A 1/4-inch masonry drill bit is also included. This anchor kit fits most arrow buildings. With this kit, your arrow shed will get the protection needed against strong winds.Contains quantity 4 steel corner gusset and perimeter clips, lag bolts for building


Simpson Strong Tie WA50100SS All Stainless Steel Wedge Anchor with 1/2-Inch by 10-Inch with 2-Inch Thread, 25-Pack
By Simpson Strong-Tie
In Stock
$223.75

mpn: WA50100SS, ean: 0044315379536,

4.6 out of 5 stars with 96 reviews
The 303 Stainless Steel Wedge-All Anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout filled concrete masonry in corrossive environments. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths.One piece wrap around clip. 303 stainless steel. Threaded end is chamfered for added versatility. Most sizes feature full thread for added


Powers Fastening Innovations 05700S 5/16-Inch by 2-3/8-Inch Tie Wire Lokbolt As All Steel Sleeve Anchor, 100 Per Box
By Powers Fastening Innovations
In Stock
$43.85

mpn: 05700S, ean: 0075352778235,

4.5 out of 5 stars with 117 reviews
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Pre-assembled single unit sleeve anchor available in carbon steel and stainless steel. Can be used in concrete block, brick and stone. 100 per box. Extension


Simpson Strong Tie Wa50812 1/2-Inch by 8-1/2-Inch with 6-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 25-Piece
By Simpson Strong-Tie
In Stock
$39.99

mpn: WA50812, ean: 0044315053979,

4.3 out of 5 stars with 70 reviews
The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.One piece wrap around clip. Threaded end is chamfered for ease of starting nut. Length identification head marks.


CONFAST 3/8" x 1-7/8" 304 Stainless Steel Hex Sleeve Anchor (50 per box)
By CONFAST
In Stock
$48.99

mpn: SAHS38178,

4.6 out of 5 stars with 11 reviews
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI



Viewing Page 1 of 5

View more products in Nails, Screws & Fasteners.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - historiccharlesstreet.com. All Rights Reserved.